80Z7
Call for Pricing
Price
Make:
360 Yield Center
Model:
80Z7
Category:
Hitachi Loaders, New, Wheel Loaders
ENGINE(EPA Tier 4 Interim/EU Stage IIIB certified) |
||
| Gross Power (SAE J1995) | 200 HP/2,200 RPM (149 kW/2,200RPM) | |
| Net Power ISO 9249 | 193HP/2,200 RPM (145 kW/2,200RPM) | |
| Make/Model | CumminsQSB6.7 diesel engine | |
| Type | 4-cycle, water-cooled, direct injection with turbocharger and air cooled intercooler | |
| Number of cylinders | 6 | |
| Bore and stroke | 4.213″ x 4.882″ (107mm x 124mm) | |
| Total displacement | 408.2in3(6.69 liters) | |
| Alternator | AC 24V – 1.56 kW (65 amp) | |
| Air Cleaner | Dry type (double element) | |
| Starter Motor | DC 24V – 7.8 kW (10.5 HP) | |
| Battery | 12V – 108AH (1,000 CCA), 2 units | |
 |
||
| TORQUE CONVERTER AND TRANSMISSION | ||
| Torque converter | 3 element, single-stage, 1-phase | |
| Transmission | Countershaft type, Full power shift | |
| Top Speed : Forward (4 speeds) | 4th: 22.4 MPH (36.0 km/hr)* | |
| Speed : Reverse (3 speeds) | 3rd: 15.5 MPH (24.9 km/hr) | |
| * Indicates speed in lock-up | ||
|
||
| SYSTEMS REFILL CAPACITY | ||
| LOCATION | GALLONS | LITERS |
| Fuel tank (diesel fuel) | 67.4 | 255 |
| Engine lubricant (including oil pan) | 6.6 | 25 |
| Engine coolant | 7.4 | 28 |
| T/M & T/C | 7.1 | 27 |
| Axle (front/rear) | 8.5/8.5 | 32/32 |
| Hydraulic oil tank | 30.1 | 114 |
| Hydraulic system (including hydraulic tank) | 47.6 | 180 |
|
||
| HYDRAULIC AND STEERING SYSTEM | ||
| Steering type | Articulated frame steering | |
| Steering mechanism | Hydraulic power steering unit, pilot operated type | |
| Lift (boom) cylinder | Two (2) double-acting piston type: 5.118″ x 34.645″ (130mm x 880mm) | |
| Tilt (bucket) cylinder | One (1) double-acting piston type: 6.496″ x 20.078″ (165mm x 510mm) | |
| Steering cylinder | Two (2) double-acting piston type: 2.756″ x 17.401″ (70mm x 442mm) | |
| Main oil pump | Variable piston type:72.6 GPM/710 PSI @ 2200 RPM (275 LPM/4.9MPa @ 2200 RPM) | |
| Pilot oil pump | Gear type:9.3 GPM/570 PSI @ 2200 RPM (35.1 LPM/3.9 MPa @ 2200 RPM) | |
| Relief valve set pressure | Loading | 3974psi, 27.4 MPa (280 kg/cm2) |
| Steering | 3974psi, 27.4 MPa (280 kg/cm2) | |
| HYDRAULIC CYCLE TIME* front end loading, Z bar linkage system | ||
| Lifting time (at full load) | 5.9 sec. | |
| Lowering time (empty) | 3.3 sec. | |
| Bucket dumping time | 1.6 sec. | |
| TOTAL | 10.8 sec. | |
| * Measured in accordance with SAE J732C | ||
|
||
| AXLE SYSTEM | ||
| Drive system | 4-wheel drive | |
| Front and rear axle | Semi-floating type | |
| Tires | 23.5-25-16PR(L-3) (L-4) (L-5) | |
| 23.5R25(L-3) (L-4) (L-5) | ||
| Reduction and differential gear | Spiral bevelgear, limited slip, single stage reduction | |
| Final reduction gear | Inboard mounted, internal planetary gear | |
| Oscillation angle | ±12° | |
|
||
| BRAKE SYSTEM | ||
| Service brakes | 4 wheel, wet multiple disc brake. Controlled by full hydraulic system. Dual circuit. | |
| Parking/Emergency brake | Spring-applied, oil pressure-released. Located on driveline. | |
Similar Products
135ZV-2
Call for Pricing
ENGINEGross Power (SAE J1995)760 HP/2,100 RPMNet Power ISO 9249720 HP...
40ZV-2
Call for Pricing
ENGINENet Power ISO 924945 HP/2,400 RPMMake/ModelKubota V2403-M-DI
Typ...
