115Z7 XT
Call for Pricing
Price
Make:
360 Yield Center
Model:
115Z7 XT
Category:
Hitachi Loaders, New, Wheel Loaders
 |
||
| ENGINE(EPA Tier 4 Interim/EU Stage IIIB certified) | ||
| Gross Power (SAE J1995) | 532 HP/1,800 RPM (397 kW/1800RPM) | |
| Net Power ISO 9249 | 531 HP/1,800 RPM (396 kW/1800RPM) | |
| Make/Model | Isuzu 6WG1 diesel engine | |
| Type | 4-cycle, water-cooled, direct injection with turbocharger and air cooled intercooler | |
| Number of cylinders | 6 | |
| Bore and stroke | 5.787″ x 6.063″ (147mm x 154mm) | |
| Total displacement | 957 in3(15.68 liters) | |
| Alternator | AC 24V – 2.64 kW (110 amp) | |
| Air Cleaner | Dry type (double element) | |
| Starter Motor | DC 24V – 7.0 kW (9.4 HP) | |
| Battery | 12V – 200AH (1,300 CCA), 2 units | |
|
||
| TORQUE CONVERTER AND TRANSMISSION | ||
| Torque converter | 3 element, single-stage, 1-phase w/lock-up clutch | |
| Transmission | Planetary gear type, Full power shift. Autobrake protects transmission from overspeeding. | |
| Top Speed : Forward (4 speeds) | 4th: 22.4 MPH (36.0 km/hr)* | |
| Speed : Reverse (3 speeds) | 3rd: 14.2 MPH (22.8 km/hr) | |
| * Indicates speed in lock-up | ||
|
||
| SYSTEMS REFILL CAPACITY | ||
| LOCATION | GALLONS | LITERS |
| Fuel tank (diesel fuel) | 174.9 | 662 |
| Engine lubricant (including oil pan) | 15.0 | 57 |
| Engine coolant | 22.5 | 85 |
| T/M & T/C | 23.8 | 90 |
| Axle (front/rear) | 47.6/47.6 | 180/180 |
| Hydraulic oil tank | 79.3 | 300 |
| Hydraulic system (including hydraulic tank) | 145.3 | 550 |
|
||
| HYDRAULIC AND STEERING SYSTEM | ||
| Steering type | Articulated frame steering | |
| Steering mechanism | Hydraulic power steering unit, pilot operated type | |
| Lift (boom) cylinder | Two (2) double-acting piston type: 7.480″ x 44.567″ (190mm x 1132mm) | |
| Tilt (bucket) cylinder | Two (2) double-acting piston type: 7.086″ x 27.126″ (180mm x 689mm) | |
| Steering cylinder | Two (2) double-acting piston type: 3.937″ x 28.346″ (100mm x 720mm) | |
| Main oil pump | Variable piston type: 100.4 GPM/1000 PSI @ 1800 RPM (380 LPM/6.9MPa @ 1800 RPM) | |
| Pilot oil pump | Variable piston type: 27.7 GPM/3844 PSI @ 1800 RPM (105 LPM/26.5 MPa @ 1800 RPM) | |
| Relief valve set pressure | Loading | 4554 psi, 31.4 MPa (320 kg/cm2) |
| Steering | 3988 psi, 27.5 MPa (280 kg/cm2) | |
| HYDRAULIC CYCLE TIME* front end loading, Z bar linkage system | ||
| Lifting time (at full load) | 8.9 sec. | |
| Lowering time (empty) | 4.5 sec. | |
| Bucket dumping time | 2.2 sec. | |
| TOTAL | 15.6 sec. | |
| * Measured in accordance with SAE J732C | ||
|
||
| AXLE SYSTEM | ||
| Drive system | 4-wheel drive | |
| Front and rear axle | Full-floating type | |
| Tires | 35/65R33 (L-5) Base Tire | |
| 35/65R33 (L-4) | ||
| 875/65R33 (L-5) | ||
| Final reduction gear | Outboard mounted, internal planetary gear | |
| Oscillation angle | ±12° | |
|
||
| BRAKE SYSTEM | ||
| Service brakes | 4 wheel, wet multiple disc brake. Controlled by full hydraulic system. Dual circuit. | |
| Parking/Emergency brake | Spring-applied, oil pressure-released. Located on front axle. | |
Similar Products
135ZV-2
Call for Pricing
ENGINEGross Power (SAE J1995)760 HP/2,100 RPMNet Power ISO 9249720 HP...
40ZV-2
Call for Pricing
ENGINENet Power ISO 924945 HP/2,400 RPMMake/ModelKubota V2403-M-DI
Typ...
